[ENERGETIC] Spring Steel Sheet Bed (PEI)

Items Included:

Spring Steel Sheet pre-applied PEI Sheet+Magnetic Rubber Plate

the magnetic base can stand the high temp at 140C without losing magnetism, suitable for almost all filaments.  PLA, ABS, PC, etc

Advtanges:

• Never warp& Never rust.

• Easy to get the first layer even for a new user

• Flexible, Removable, stick to magnets very well

• Suits variety of filaments, especially for PLA

• Free clean- just flex the plate a little then take the prints off after cooled

• Fast heater performance, less waiting time after printing.

• A lifetime 3D printer bed

1. smooth PEI- 0.2MM thickness with 3M468 tape

2.Our spring steel sheet is flat.

3.Strong magnetic base: 1.5MM, 300LSE tape,  magnetism-600GS  high temp resist up to 130C at long time

Material:

• 100% real Ultem1000（ PEI）amber color, matte surface. - Made in Europe

• This spring steel sheet is flat, flexible, stainless stick to magnets very well. 0.5mm or 0.4mm thickness

• PEI is 3m tape pre-applied, free bubbles.

Important Information:

1.Recommend print temps

• PLA – 60C

• HTPLA – 60C

• PETG – 70-80C

• PCTG – 70-80C

• ABS – 100C

2.Product Usage Guidelines

• PETG/PCTG/TPU– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI

• Part Removal– Make sure your plate is at close to room temp (under 30C) before removing parts. If you remove when hot it more likely to damage the surface

How to use?

1. After apply the PEI sheet on our special spring stainless steel sheet, You can simply use 4 clips or magnets to hold it on the heatbed, then enjoy the printing.

2. Easily remove 3D prints on printer by removing the spring steel plate, flexing it, and popping the print off. It's simple and makes the print removal process much easier

Smooth PEI side

（PEI- 0.2MM thickness with 3M468 tape）